Shopping Cart
There are no more items in your cart
SKF 6011/C3 Open Deep Groove Ball Bearing
The SKF 6011/C3 is an open single row deep groove ball bearing designed for smooth rotation and efficient shaft support in industrial machinery. It accommodates radial loads and axial loads in both directions while maintaining low friction. Its increased internal clearance makes it suitable for assemblies where C3 clearance is specified.
Design and Construction
The SKF 6011/C3 features a single row of steel balls running between deep raceway grooves. A sheet metal cage separates and guides the rolling elements during rotation.
Its bearing steel construction provides effective load support under suitable operating conditions. With dimensions of 55x90x18mm, it offers a smaller outside diameter and narrower profile than the 6211 series while retaining the same 55mm bore.
C3 Internal Clearance and Open Design
The bearing features C3 radial internal clearance, which is greater than normal clearance. This helps compensate for reductions in operating clearance caused by interference fits and temperature differences between the bearing rings.
Its open design without seals or shields allows grease or oil to reach the rolling elements directly. Suitable external sealing may be necessary to protect against contamination and lubricant loss.
Applications
The SKF 6011/C3 can be considered for rotating machinery where its dimensions and increased internal clearance meet the operating requirements.
Industrial electric motors
Pumps and fluid handling equipment
Industrial fans and blowers
Mechanical drive assemblies
Gearboxes and industrial transmissions
General industrial rotating machinery
Benefits
The SKF 6011/C3 offers several practical advantages.
C3 Internal Clearance: Helps accommodate reductions in operating clearance caused by interference fits and temperature differences.
Low Friction: Supports smooth shaft rotation while helping reduce mechanical energy losses.
Combined Load Support: Accommodates radial loads and axial loads in both directions.
Slim Construction: Provides shaft support where a 55mm bore and relatively small outside diameter are required.
High Speed Capability: Its deep groove construction supports relatively high rotational speeds with appropriate lubrication.
Flexible Lubrication: Open construction allows direct grease or oil lubrication.
Bearing Selection
Before purchasing, confirm that the 55x90x18mm dimensions and C3 radial internal clearance match your equipment requirements.
Check operating loads and speeds alongside shaft and housing fits. Lubrication and contamination exposure should also be considered.
If normal internal clearance is required, the SKF 6011 may be more suitable. For applications requiring integrated sealing, check the corresponding sealed or shielded SKF 6011 variants.
