SKF 6015-2RS1 Rubber Sealed Single Row Deep Groove Ball Bearing 75x115x20mm

The SKF 6015-2RS1 sealed deep groove ball bearing provides support for rotating equipment with a 75mm shaft where bearing width and housing diameter must be carefully managed. Its single row ball and raceway arrangement carries radial loads while accommodating moderate axial forces in either direction. SKF specifies a basic dynamic load rating of 41.6kN and a basic static load rating of 33.5kN, allowing engineers to assess the bearing against operating loads and expected service life. The compact 60 series cross-section offers an alternative to wider 62 and 63 series bearings when their greater load capacity is unnecessary.

The 2RS1 double rubber contact seals retain the factory grease and help prevent contaminants from reaching the rolling elements. This makes the bearing particularly useful in machinery where frequent relubrication would be inconvenient. SKF specifies a limiting speed of 3,400rpm for this sealed configuration. Contact seals generate more friction than an open bearing, so temperature and operating speed should be considered together. Normal radial internal clearance is suitable where the installed fits and thermal conditions do not require increased C3 clearance.

Typical Applications:

Industrial electric motor shaft assemblies

Centrifugal pumps and circulation equipment

Industrial fans and blower systems

Conveyor drive and roller assemblies

Mechanical power transmission equipment