Shopping Cart
There are no more items in your cart
SKF 6305 Open Deep Groove Ball Bearing
The SKF 6305 is an open single row deep groove ball bearing designed for efficient shaft support in industrial rotating equipment. Its deep raceway grooves accommodate radial loads and axial loads in both directions while allowing smooth rotation with low friction.
Design and Construction
The SKF 6305 features a single row of steel balls guided by a sheet metal cage. Its bearing steel construction provides strength and effective load support under suitable operating conditions.
With dimensions of 25x62x17mm, this bearing provides a relatively substantial cross section for machinery requiring the standard 6305 bearing size.
Open Design and Internal Clearance
The bearing has an open design without seals or shields. This allows direct grease or oil lubrication and makes it suitable for equipment with an appropriate lubrication arrangement.
It features normal radial internal clearance for applications where standard clearance is specified. External sealing may be necessary to protect the bearing against contamination and lubricant loss.
Applications
The SKF 6305 can be considered for rotating machinery where its dimensions and operating characteristics meet the equipment requirements.
Electric motors
Industrial pumps
Fans and ventilation systems
Conveyor drive assemblies
Industrial transmission equipment
General industrial machinery
Benefits
The SKF 6305 offers several practical advantages.
Low Friction: Supports efficient rotation while helping reduce mechanical energy losses.
Combined Load Support: Accommodates radial loads and axial loads in both directions.
High Speed Capability: Its deep groove raceways support relatively high rotational speeds with suitable lubrication.
Flexible Lubrication: Open construction allows direct grease or oil lubrication.
Robust Construction: Bearing steel components and the 6305 design provide effective load support under suitable operating conditions.
Standard Dimensions: Fits assemblies designed for the 25x62x17mm bearing size when the required operating specifications also match.
Bearing Selection
Before purchasing, confirm that the 25x62x17mm dimensions and normal radial internal clearance match your equipment requirements.
Check operating loads and speeds alongside shaft and housing fits. Lubrication and contamination exposure should also be considered. If increased internal clearance or integrated sealing is required, an appropriate SKF 6305/C3 or sealed or shielded variant may be more suitable.
