SKF 6017-2RS1 Rubber Sealed Single Row Deep Groove Ball Bearing 85x130x22mm

The SKF 6017-2RS1 sealed deep groove ball bearing provides dependable support for 85mm rotating shafts where available housing space and bearing load capacity need to be balanced. Its single row construction accommodates radial loading and moderate axial forces in either direction, making it suitable for fixed and appropriately designed locating arrangements. SKF catalogue specifications include a basic dynamic load rating of 52kN and a basic static load rating of 43kN, with a sealed-bearing limiting speed of 3,000rpm. Compared with wider 62 and 63 series bearings of the same bore, its narrower cross-section can help reduce assembly dimensions where the calculated loads allow.

The 2RS1 rubber contact seals provide a protective barrier on both sides of the bearing, helping retain the factory grease while restricting dust and moisture ingress. This makes the design particularly useful in enclosed drives and equipment with limited lubrication access. Contact sealing generates additional friction compared with an open bearing, so temperature and operating speed remain important selection factors. The normal radial internal clearance must also be assessed against interference fits and thermal expansion; machinery requiring increased internal clearance may need a C3 variant instead.

Typical Applications:

Industrial electric motor shaft assemblies

Centrifugal pumps and fluid-handling equipment

Industrial fans and air-handling units

Conveyor drive and pulley arrangements

Gearbox auxiliary shafts and mechanical transmissions