SKF 6032-2Z Metal Shielded Single Row Deep Groove Ball Bearing 160x240x38mm

The SKF 6032-2Z double-shielded deep groove ball bearing provides rotational support for large shafts where the available housing space favours a relatively narrow radial bearing section. Its 160mm bore, 240mm outside diameter and 38mm width make it suitable for substantial industrial assemblies requiring precise shaft and housing dimensions. The single row deep groove raceways accommodate radial loads alongside axial forces in either direction, within the bearing's rated capacity. SKF catalogue data gives a basic dynamic load rating of 143kN and a basic static load rating of 143kN. These ratings assist engineers in evaluating fatigue life and stationary loading, but they do not represent permissible continuous working loads without considering the complete operating conditions. Its dimensions must be checked carefully against related large-bore bearing series before replacement.

The 2Z suffix identifies two non-contact metal shields, one on each side of the bearing. Unlike the contacting rubber seals used in 2RS1 variants, these shields provide a reduced-friction arrangement while offering a degree of protection against larger contaminants and helping retain grease. They are not intended to provide the same resistance to water or fine contamination as contact seals. SKF catalogue specifications list a 5,600rpm reference speed and a 2,800rpm limiting speed for the shielded configuration; neither value should be treated as an unrestricted operating speed. Normal (CN) radial internal clearance means shaft fits, housing fits and operating temperatures must be considered when assessing installed clearance. For heavy components of this size, correct handling, suitable mounting equipment and controlled fitting forces are particularly important.

Typical Applications:

Large industrial electric motor assemblies

Heavy-duty conveyor and material handling drives

Industrial transmission and drive shaft systems

Large ventilation and air handling machinery

Enclosed processing equipment with 160mm shafts